Quantcast
Channel: ToolGuyd
Viewing all 5920 articles
Browse latest View live

Hot Deal on this Smart Plug 2-Pack!

$
0
0

Kasa Smart Outlets 2-Pack

A few months ago, I bought this TP-Link Kasa smart plug 2-pack for $25.

Back in May, I posted about the deal pricing when it was discounted to $18 for the 2-pack.

Now, the same Kasa smart plug 2-pack is priced at $15. *Hold on a moment. Done, I just ordered a second pair.*

This is crazy-good pricing, not only compared to what I paid just 4 months ago in March, but compared to competing products, such as Amazon’s ($25 via Amazon).

Setup of my Kasa smart plugs were easy, the app is straightforward, and so far everything has been working quite well. *Knock on wood,* it has all been trouble-free.

As I mentioned, I just ordered two more, for use with shop lights and maybe also an air cleaning fan or dust vac. I’ve been careful to avoid exceeding the load rating, using mine for low-surge devices.

I connected surge protector power strips without issue, for controlling multiple lights and a heat lamp when I was starting my summer vegetable plants from seed, and also had no trouble fitting other plugs into the adjacent receptacles due to the compact design and rectangular shape.

This particular smart plug, the “Lite” model HS103, is designed for controlling “lamps, fans, and other smaller electronics.” It’s rated for powering any device under 12 amps.

There’s also the HS105, which is rated to 15 amps, and it’s quite a bit pricier.

You get scheduling via the smartphone app, as well as an “away mode,” and the smart plugs can also be controlled via voice control through optional Alexa, Google Assistant, or Microsoft Cortana hubs.

You can buy a 1-pack for $10, 2-pack for $15, or 3-pack for $25.

Buy Now: Kasa 12A 2-Pack via Amazon
Buy Now: Kasa 12A 1-Pack via Amazon
Buy Now: Kasa 12A 3-Pack via Amazon
Buy Now: Kasa 15A 3-Pack via Amazon

I put off on buying smart plugs of any kind until I needed scheduling for my plant lights, and a pair of these (I already had power strips) didn’t cost any more than timers would have, but they offer greater flexibility and functionality.

I couldn’t figure out what brand to buy into, but TP-Link is a decent name, and I saw some good feedback about their Kasa-branded smart plugs and other devices. I can’t tell you if this is the best brand out there, but so far I’ve been pleased with my experiences. I wish this was the price I paid back in March, but even at that time the pricing was hard to beat.

$15 for a 2-pack seems like a great deal, although I’m not sure how long it’ll last. The pricing has held at $18 previously, and I was alerted to the price drop via my Amazon shopping cart. This could be “new low” pricing, or a temporary sale, it’s impossible to know for sure.


Wiha’s Big New Tool Reveal is a 50pc Limited Edition Tool Set

$
0
0

Wiha USA Veto Pro Pac Combo Teaser

Over the weekend, a couple of readers forwarded a Wiha USA marketing newsletter, where they teased that Something BIG is Coming.

Monday morning at 8:00 AM CST, we’re launching something incredible.

Well, it’s Monday morning, and here’s their big reveal: Wiha USA has launched the:

“ultimate limited edition tool and tool storage set imaginable.”

Wiha USA Veto Pro Pac Combo

There will be 100 limited edition tool kits available, and here’s what it comes with:

  • Veto Tech Pac Backpack Tool Bag
  • 7 Insulated SoftFinish Screwdrivers
  • 3 Insulated Cushion Grip Pliers/Cutters
  • 6 Color-Coded Magnetic Nutsetters,
  • 22 Color-Coded Hex L-Keys
  • 7 Terminator Impact Bits
  • 3 Classic Grip Pliers/Cutters
  • 7″ Classic Grip Wire Strippers
  • Slotted 8mm SoftFinish Extra Heavy-Duty Screwdriver

Wiha puts the tool count at 50.

If you consider the screwdriver bits as 1 bundle of 7 bits, and the hex key sets as only 2 tools, that count is reduced to 22 tools and a tool bag for $400.

Wiha USA Veto Pro Pac Combo Contents

Here’s the full list:

  • Veto Pro Pac – Tech Pac Backpack Tool Bag
  • Classic Grip Wire Strippers and Cutters 7″
  • SoftFinish X Heavy Duty Screwdriver | Slotted 8.0mm x 150mm
  • 7 Piece Insulated SoftFinish® Cushion Grip Screwdriver Set
    • Slotted 3.5mm, 5.5mm, 6.5mm
    • Phillips #1, #2
    • Square#1, #2
  • 3 Piece Insulated Cushion Grip Pliers and Cutters Set
    • Insulated Industrial Lineman’s Pliers 9.5″
    • Insulated Industrial High Leverage Cutters 8.0″
    • Insulated Industrial Long Nose Pliers 8″
  • 6 Piece Color-Coded Magnetic Nutsetters Set | SAE
    • 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″
  • 9 Piece Color-Coded Hex L-Keys Set | Metric
    • 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • 13 Piece Color-Coded Hex L-Key Set | SAE
    • 0.5″, 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8″
  • 7 Piece Trial Terminator Impact Bit Buddy Set
    • 2 x Phillips #2 | 2 x Square #2 | 2 x Torx® T25 | 1 x Torx® T30
  • 3 Piece Classic Grip Pliers and Cutters Set
    • Classic Grip Auto Pliers 10.0″
    • Classic Grip Adjustable Pliers Box Type 7″
    • Classic Grip End Cutting Nippers 8.0″

The Veto Pro Pac tech backpack has 46 pockets.

Price: $400

Discussion

Wiha’s tool sets tend to be expensive, but this set seems a little better priced in comparison, although the screwdriver bits throw things off a little bit. Their 54+ Master Electrician’s set ($623 via Amazon), for instance, contains a set of precision screwdrivers instead of insert bits. I say 54+ because that particular set is described as a 54pc set, a 56pc set, and a 59pc set, depending on where you’re looking.

This set comes with a mix of insulated and non-insulated screwdrivers and pliers and cutters.

If the Veto Pro Pac is identical to the Veto Service Technician tool backpack, its retail value is going to be the majority of the cost of this kit. The backpack – if it’s the same one – is priced at $290 via Amazon.

At the time of this posting, around 10:30am ET, the tool kit is still in stock.

I can’t help but feel that if this were a marketing move by Wera or Knipex, all 100 sets would have flown off the figurative shelf by now. Maybe it’s the mix of insulated tools that’s dulling the appeal a little bit?

If you want that Veto tool bag, assuming it’s regular Veto quality and comparable to the Service Tech bag, and at least half the tools in this assortment, you should be getting your money’s worth, and then some.

What’s the intent of this promo though? To drive up “viral” interest with newsletter blasts and social media hype only to sell a maximum of 100 kits? Maybe they’re testing the water with a Veto Pro Pac tool bag collaboration?

Wiha’s distributors seem to be cut out of the loop on this one, as this is a Wiha USA-direct promo.

It’ll be interesting to see how long this limited edition sale lasts for, and what the move might lead to later.

New Milwaukee Tool 3lb Drilling Hammer

$
0
0

Milwaukee 3lb Drilling Hammer Fiberglass Handle

A new Milwaukee Tool press release hit my inbox today, and it’s titled: Milwaukee Wrecks the Jobsite with New Drilling Hammer, Nail Pullers, and Pry Bars.

That’s definitely one of the best titles I’ve seen so far, but I digress.

I think the nail pullers and pry bars might be of strong reader interest, but found myself compelled to tackle a post on the drilling hammer first.

Drilling hammers are as fairly simply as hammers can be, but they’re also incredibly versatile.

I went back and forth about buying my first (and only) drilling hammer for a while. Did I need a drilling hammer, or an engineer hammer? I ultimately concluded that an engineer hammer was more akin to a mini sledge hammer for demolition work and a drilling hammer would be better suited for general workshop use. I eventually caught a good sale and bought a Stanley 3lb drilling hammer for $15 online.

But then, here’s Milwaukee advertising their new drilling hammer as a demo tool. I think that drilling hammers can be demo tools, but I use them more like a stubby and heavy-weight ball pein hammer, for driving larger chisels, punches, and other such things.

I think I would treat Milwaukee’s new drilling hammer as a sort of hybrid tool.

Milwaukee 3lb Drilling Hammer Steel Faces Closeup

Milwaukee’s new drilling hammer has a milled face on one side, and a smooth face on the other.

The milled face is said to provide additional grip when striking chisels, punches, stakes, and spikes, helping to prevent slippage or misstrikes. The smooth face is better suited for general demo or driving tasks.

Milwaukee 3lb Drilling Hammer Fiberglass Handle Striking Masonry Chisel

The hammer features a high-strength fiberglass handle that’s reinforced for overstrike protection just under the hammer head.

Milwaukee says the new design provides ultimate power and durabilty, and that the hammer is precision balanced and delivers forceful blows with less effort.

Additional features include a peel-resistant grip and tether-ready lanyard hole.

Price: $18
ETA: July 2020

Model: 48-22-9310

Buy Now via Home Depot (Coming Soon)
Compare: Estwing Fiberglass Hammer via Amazon
Compare: Estwing Steel Hammer via Amazon
Compare: Gearwrench Fiberglass via Amazon

Discussion

When I said that drilling hammers are as fairly simply as hammers could be, I meant that they’re basic in a “they’re boring and there’s not much to them” kind of way. Still, when you need one, I’m sure you’re glad to have one. I rarely use mine, but when I need it, there’s no easy substitute.

It has been more than 12 years since I bought my Stanley AntiVibe drilling hammer, and it practically looks brand new. I remember going back and fort for a while before settling on a drilling hammer vs. an engineer hammer, and Amazon temporarily dropping the price on a Stanley helped me decide on the brand.

If you want a steel-handled hammer, it’ll cost a bit more. Looking at competitive fiberglass-handled drilling hammers, Estwing has one for $16 at Amazon (linked above), and Gearwrench has one for $21.

The press materials list the new Milwaukee drilling hammer at $18, and Home Depot’s product page has it for $20.

Compared to the other fiberglass-handled drilling hammers I took a quick look at, Milwaukee’s has the added overstrike protection zone, the addition of a milled face on one side of the hammer head, and a tether-ready lanyard hole, while being in the same ballpack with respect to price.

It seems that the new Milwaukee drilling hammer is a little more thought-out than the competition, or at least a little more premium-designed.

The Milwaukee hammer also looks to have a greater taper at the end of the handle, and I wonder if this is directly related to the “precision balance” that they’re talking about, or if it’s just a hand-stop.

Looking at a couple of competitive options, why would I buy another brand’s offering over this new Milwaukee? At around the same price, the Milwaukee looks to deliver some extra features. I don’t know if I’d take advantage of the milled strike face, but it seems like it could be potentially useful.

To put it bluntly, Milwaukee’s new drilling hammer isn’t a game-changer, and it has hints of “me too” as they deepen their selection of general construction and demo tools. However, despite the subtle suggestion of this being a “me too” product, it has obvious competitive benefits. Do the Gearwrench or Estwing hammers have an overstrike zone? Do they have lanyard holes for securing the tool when working above? No and no.

Dewalt Drilling Sledge Hammer

Dewalt came out with a new drilling hammer last year. Their 3lb drilling hammer is listed at Home Depot for $17, but it doesn’t look like you can actually order it.

That Dewalt hammer is in the same $15 to $20 price range as the Milwaukee, and it similarly features a fiberglass handle with overstrike protection. It seems more oriented towards demolition work, described as a drilling sledge hammer with an aggressively pointed face on one side.

It might have been interesting to see how the two hammer styles compared, but Dewalt’s doesn’t seem to be widely available right now (anymore?). The Milwaukee looks more “traditionally designed,” if there is such a thing. I’d categorize or describe the Milwaukee as featuring improvements over existing tried-and-true models, with the Dewalt trying harder to be brand new.

That’s why the Milwaukee seems a little “me too” in nature, but this is a good thing. That it offers slight improvements with regard to features and geometry, rather than trying to be too new and different, makes it compelling.

If I were to buy a new drilling hammer today, I think I would narrow my choices down to either this fiberglass-handled Milwaukee, or Estwing’s steel-handled hammer. Fiskars also has a 3lb hammer ($35 and change via Amazon), but I don’t if it’s worth double the price.

Just a few years ago, Milwaukee entered the hand tool market with just a few offerings. Now, what don’t they offer?

Misc Tool Talk, 7/21/20 Edition

$
0
0

Peeking at a Milwaukee Brushless Motor

Milwaukee M18 Fuel Impact Driver Brushless Motor Teardown

Here’s a rear internal view of Milwaukee’s M18 Fuel brushless impact driver. I removed the back cap, or what I thought was the cap, and the fan, permanent magnet, and drive shaft came off as one piece. I don’t have anything else to add about this, or why I was peeking inside the tool’s housing, but I thought you’d find the image interesting.

Dewalt 12V Max Brushless Current Draw

I also learned something interesting yesterday, about Dewalt’s 12V Max brushless screwdriver, and how it draws more than 3-4A of current to spin up without load. I thought it’d be less, but at 4A that’s what, 50W under no-load conditions? I have more measurements to make.

Workshop Cleanup

Today’s a workshop cleaning day, and it’s a tough one because I’m now trying to determine whether to go with cabinets, shelving, workbenches, or a pile of milk crates.

I had went with a custom shelving solution out of 80/20 extrusions, but the slope, humidity, temperature, or other garage environmental conditions caused the rubber-padded swivel feet to fail. The top rails are 1.5″ x 1.5″ and so there’s no room for a larger bracket to accept larger-stemmed swivel feet. I could have better success with larger feet than what I used, but at significantly higher prices I’m not willing to pay.

So… I think I’ll redo things, perhaps with shop-made racks or what-not until I can figure out a sturdier metal-based solution. I might have to build an assembly table that doubles as a garage for my kids’ Power Wheels car, which is currently stored vertically in my 80/20 shelving unit.

It’s funny, I have similar rubber-padded swivel feet in the basement, and nothing slid apart, so why did it happen in the garage?  I guess if environmental conditions are just right, combined with the swivel feet resting at an angle, the adhesive fails and allows the steel foot to slip.

Olight Sale

Olight Flashlight Flash Sale 7-20-20

Olight’s flash sale is still ongoing. Read more about it here. Visit the sale page directly. If you miss it, don’t fret; with how things have been going, there will likely be another flash sale next month. And if you’re not into Olight, we’ll have a bunch of different lights from other brands to recommend for and against in coming weeks.

Social Media Posts

Here’s some of what ToolGuyd has been posting about to social media:

You can follow us on Instagram here: @ToolGuyd

That’s right, we were *finally* able to work with Instagram to get the ToolGuyd username.

View this post on Instagram

FINALLY got my @lagunatools band saw setup. My original saw blade was defective, finally got it sorted out with them in the fall, and after a few months I cleaned the shop, pulled it out of the corner, worked up the courage to try again, and *knock on wood* this is how a band saw should work. I still have small adjustments to make, but it’s ready to rip some wood! I have maybe 10 projects lined up, after that I’ll get a thinner blade for curved cuts and typical learner band saw projects. I feel like it’s a small but meaningful personal victory. I also learned my lesson about buying equipment I was ready for with respect to needs but not quite in terms of time or space. I also regret not spending a little more for the higher-end model with blade brake, but this came with a two-piece stand, which means I could potentially move it in the future to basement, at least potentially a little easier than the one-piece setup. #tools #woodworking #bandsaw #newtools

A post shared by Stuey (@toolguyd) on

What’s an Engineer Hammer?

Estwing Engineer Hammer

According to Wikipedia and an early 1900’s reference on locomotive supplies, engineer hammers were part of a railroad engineer’s toolkit.

Today, engineer hammers, such as this Estwing, are essentially shaped like mini sledge hammers. I have found that they are generally longer than drilling hammers, and with narrower sledge-shaped heads. Drilling hammer heads are a bit stubbier, such as on the new Milwaukee:

Milwaukee 3lb Drilling Hammer Fiberglass Handle

If you haven’t already seen it, here’s our post on the new Milwaukee drilling hammer.

Tool of the Day: Seville Wire Shelving Cart

Seville Wire Shelving Cart

Today’s tool of the day is this Seville 3-tier wire shelving cart, priced at $74 via Amazon. I bought one back in April for the same $74.04 price, and it’s quite versatile. Right now I’m using it for gardening supplies, but it’ll be used as a tool and materials catch-all once the season is over.

It measures 30″ wide (34″ with the handle) x 18″ deep x 33.5″ tall and has a 500 lb weight capacity. The shelves all have raised lips, which helps keep things from sliding off, and all 4 casters swivel.

Home Depot Discontinues EGO Cordless Outdoor Power Tools

$
0
0

Home Depot Ego Logo

Several readers wrote in, about reports that Home Depot has cut or “dropped” EGO as one of their cordless outdoor power tool offerings.

Thank you to everyone who wrote in with news of this development!

EGO is one of the best cordless OPE tool brands out there these days, and they rose in ranks as a Home Depot exclusive before broadening their distribution in recent years.

Home Depot made an announcement yesterday, that they will accelerate investments in outdoor power categories, involving a refinement of top brands.

The new move will include a reset that will be executed at approximately 1300 Home Depot store locations by the end of 2020. All stores should have their outdoor power equipment sections reset through spring 2021.

An interview that Home Depot participated in with the Atlanta Business Chronicle, via BizJournals, says:

[Home Depot is] focused on the most relevant brands with the greatest adoption.

If you ask my opinion, EGO has been one of the most relevant brands in the industry, with many “firsts” and constant innovation and improvements.

The BizJournals article adds:

The Atlanta-based retail giant said the four remaining cordless options fit their aim to provide interchangeable batteries among products, and collectively make up the vast majority of platforms already owned by its customers.

I would say that the power and performance of EGO’s higher voltage and larger capacity batteries is largely responsible for their growth and success over the years. The fact that EGO only produces cordless outdoor power tool products has not been a limitation or detractor before, so why now?

Additionally, Products such as EGO’s cordless snowblower are not yet available from competing brands. Ryobi does offer a 40V Max option, but it’s lower powered compared to the EGO.

At the time of this posting, EGO’s cordless snowblower is still available on Home Depot’s website.

The Home Depot investor relations press release goes on to discuss the move as it pertains to discontinuing their relationship with the EGO cordless power tool brand:

The enhanced assortment will include The Home Depot’s top brands of innovative cordless outdoor power – Ryobi, Makita, DeWalt, and Milwaukee – as well as the most trusted brands of gas-powered products in the industry – Toro, Echo, John Deere, Cub Cadet, Honda, and Troy-Bilt.

As part of this merchandise reset, the company has made the decision to discontinue the Ego line of outdoor power equipment.

Earlier in the year, the company began refreshing its presentation of the outdoor power category to make it easier for customers to determine which equipment would best meet their needs. The branded-bay presentation features the latest in battery-powered technologies that have become increasingly popular among DIY consumers and professional landscapers.

Ryobi, DeWalt, Milwaukee, and Makita provide common battery platforms across their industry-leading power tool and outdoor power equipment products, which collectively make up the vast majority of batteries already owned by consumers. This provides customers an array of options and flexibility for their battery powered tools that can be interchanged on the same battery platform.

There was no further clarification as to what the enhanced assortment will involve, aside from featuring cordless outdoor power tools from Ryobi, Makita Dewalt, and Milwaukee tool brands, along with gas-powered offerings from a host of familiar brands.

This is a surprising move, as EGO seems to have been an extremely popular cordless outdoor power tool brand, and no doubt both companies enjoyed success from the exclusivity or near-exclusivity in recent years that their partnership has brought.

Update – See Also: Lowe’s Announces Exclusive Partnership with EGO

Lowe’s Announces Exclusive Partnership with EGO, Top Cordless Outdoor Power Tool Brand

$
0
0

Lowes EGO Logos

Lowe’s announced this morning that they will be launching an exclusive partnership with EGO, expanding their outdoor power tool offerings.

Lowe’s will be:

expanding its industry-leading portfolio of outdoor power brands as it launches of EGO, the number one brand in battery-powered outdoor equipment.

Starting in December 2020, Lowe’s will be the exclusive nationwide home center to offer EGO’s battery-powered mowers, blowers, string trimmers, hedge trimmers, edgers, chainsaws, and snowblowers.

EGO offerings will be available online at Lowe’s website and at select stores in Fall 2020, and the roll out will continue to all US stores by February 2021.

Bill Boltz, Lowe’s executive vice president of merchandising, said the following about the new exclusive partnership:

We are relentless in bringing the best quality, innovation and brands to our consumers, and today’s announcement is another bold step forward in our pursuit of bringing the best outdoor power equipment offering to our stores.

EGO is an undisputed industry leader in creating cutting-edge technology and design. This line of cordless power equipment is trusted by both DIY and Pro customers to take on any lawn and garden project, with convenience and ease.

Chervon, owner of the EGO tool brand, has said the following:

Chervon is excited to extend our partnership with Lowe’s to include EGO, the #1 rated brand in cordless outdoor power equipment.

We also look forward to the nationwide introduction of the all new SKIL 40V, 20V and 12V lineups.

– Mike Clancy, CEO Chervon North America

This exclusive partnership with EGO follows a Honda Power Equipment launch earlier in the year, and a partnership that makes Lowe’s the only nationwide home center to offer Ariens ZTR mowers and snow-clearing products.

Lowe’s will also begin carrying select Skil battery-powered outdoor power equipment in late 2020, including push and self-propelled mowers, leaf blowers, string trimmers, hedge trimmers, and other products and accessories.

Read Also: Skil Launches PWRCore 40V Cordless Outdoor Power Tools

Lowe’s lawn & garden and outdoor power equipment brand portfolio will now include Honda, Ariens, John Deere, Craftsman, Husqvarna, EGO, and Skil.

It will be interesting to see how things progress. News reports over the past few months have described Lowe’s as “closing the gap” with Home Depot, and moves like this will no doubt give them a competitive boost.

Check Out My New Garage Window Shades

$
0
0

Garage Window Shades

“What kind of blinds or shades should I install in the garage windows?” is one of the questions I’ve been stalling over for quite some time. Next, I have to figure out ceiling-mounted lights.

We have honeycomb-style shades in the house, and have had good experiences with them so far. Actually, I still have temporary paper shades in my office, also because of decision laziness.

But fabric seemed like a big mistake for the garage. What about bugs? Would spiders make nests inside of the honeycomb structure?

What about sawdust? If or when I cleaned the shades, how much effort would it take to remove sawdust from the fabric?

With hard-panel shades, cleanup should be easy. Plus, there’s the angle adjustment to let in more or less light. Raising and lowering the shades might be a slight hassle, but if I can reach the window controls to unlock and open and close it, lifting and lowering the shades shouldn’t be any trouble.

What size to go with? Where to buy them from?

Ultimately, as part of my “I’m sick of delaying things” workshop cleanup process, I measured up and made some quick decisions.

I would be inside-mounting the shades, and so I measured the inner width of the window – 32″. At Home Depot, they have “faux wood blinds” with 2″ slats that seem to be well-reviewed. The 32″ blinds have a nominal width of 31.5″, which would leave some clearance on both sides. Seemed like a good idea.

I bought the blinds, and they arrived about a week later, more than a week earlier than expected.

They were easy to install, and the instructions show how the length can be shortened if or when I desire it, as the shortest off-the-shelf length of 36″ is too long for my garage windows.

The slats definitely don’t look like wood, they look like textured plastic.

There are other sizes, with larger and smaller slats widths, and other brands including Bali and Levolor, but I didn’t feel I needed custom blinds for garage windows. A perfect width seemed good enough, and now I know I can also custom-adjust the blinds to the perfect length if that ever strikes my fancy.

There are other non-faux-wood slat options, but I went with a high-review-count product. Among the brand names I don’t know, I might as well go with one that seems popular, right?

“Home Decorators” does not seem to be a Home Depot-exclusive brand, but this particular style is said to be an “exclusive.”

The included screws were tough to drive, meaning my pilot hole wasn’t large enough. I could or should have subbed-in self-drilling Spax screws, but I didn’t have pan-head screws of the correct length on-hand.

Long story short, I’ve got new window shades up in the garage, and should provide for increased privacy.

These shades are pretty basic, but also cord-free and better-looking than the aluminum blinds I had cut to size at the home center for our first apartment.

If you’ve been putting off garage window coverings for the longest time as I have, these left me with a positive install experience. I’ll have to see how well they hold up over time, but I can’t imagine what could go wrong. There are more then 12,000 reviews at Home Depot’s website, with most being 5 or 4 star ratings.

Pricing varies, with the 32″ width (31.5″ nominal) x 36″ length being $33 each.

Buy Now via Home Depot

Understanding the Home Depot vs. Lowe’s EGO Cordless Power Tools Partnership Swap

$
0
0

Home Depot Lowes and EGO Logos

Here’s what happened: EGO, a very popular brand of cordless outdoor power tools, has gone from being a Home Depot exclusive to a Lowe’s exclusive. You can still find EGO tools at some other retailers, but not to the same extent that we’re talking about here.

On July 21st, 2020, Home Depot announced to their investors that they were accelerating investments in outdoor power categories and that this would involve a refinement of top brands. Home Depot will be performing a merchandise reset of their outdoor power equipment selection.

As part of all this, according to the news release, Home Depot would be discontinuing the EGO line of outdoor power equipment. You can read more about this here.

On July 22nd, 2020, Lowe’s announced their new exclusive partnership with EGO, and that they will be the exclusive nationwide home center to offer EGO’s popular battery-powered outdoor power tools.

There are a lot of reader comments to both posts, and in those replies there are a lot of guesses as to what happened to prompt these changes..

WHY this big change? Frankly, I don’t expect to learn the answer to this, as details behind exclusivity arrangements are rarely made public. I could of course ask our press contacts for insights, but with near-zero expectations that I would actually learn anything substantial.

I have learned industry secrets here and there over the years, and I would think my discretion is partially responsible for that. It’s a moot point though, because these partnerships involve too high-level decisions and discussions for us to ever learn details about.

I could only guess as to how this could have come to be. What’s frustrating is that my best guesses all seem plausible.

Was it Home Depot’s Initiative?

Here are Home Depot’s core-focus cordless power tools brands:

  • Dewalt
  • Makita
  • Milwaukee
  • Ridgid
  • Ryobi

Of these brands, Dewalt, Makita, Milwaukee, and Ryobi all have a strong presence in the cordless outdoor power tool industry. They all have competitive offerings, and broad selection.

EGO certainly had a place in Home Depot’s cordless outdoor power tools category, and a sizable presence at that, and the fact is that their exclusivity at Home Depot contributed to their growth and success over the years, coupled with their innovative designs, constant improvements, great performance, and excellent quality.

EGO and Home Depot were great partner together, or so it seemed, and I am sure it worked out well to both companies’ benefits.

But what if Home Depot did want to give greater shelf space to some of the brands that make up the bulk of their cordless power tools department?

It is possible that Home Depot pushed EGO out to reset their cordless outdoor power equipment category.

What About Home Depot’s Investor News Release?

However, Home Depot “resetting” their outdoor power tool category indicates what will happen and not necessarily what led up to this. Did they part with EGO, or did EGO part with them? Does this matter with respect to the investor news release? No, and so it’s understandable and even expected for the messaging to be ambiguous about this.

Regardless of the how and why, EGO leaving Home Depot and going to Lowe’s leaves a hole in Home Depot’s selection, but also one they are highly capable of filling.

Home Depot’s release is titled: The Home Depot Accelerates Investments in Outdoor Power Categories, Refines Assortment of Top Brands. EGO is mentioned once:

As part of this merchandise reset, the company has made the decision to discontinue the Ego line of outdoor power equipment.

This language does suggest that Home Depot was the deciding party, pushing EGO out and into Lowe’s arms, but in no way confirms it. It is entirely possible that EGO informed Home Depot that they would not be renewing their exclusivity arrangement and that they have instead signed a deal with Lowe’s, leading Home Depot to discontinue the line a few months before the arrangement was set to end.

With Home Depot and Lowe’s being each other’s biggest competitors, details beyond what was announced so far are unlikely to become public.

Whether EGO left Home Depot, or Home Depot changed the relationship on their side, would Home Depot’s announcement have been any different? Probably not.

Was it Lowe’s Move?

It could be possible that Lowe’s lured EGO away from Home Depot, offering a more favorable deal and promising greater benefits.

Many of Lowe’s Kobalt cordless power tools are made by Chervon, EGO’s parent company, and so they enjoy a strong relationship in that regard. Lowe’s could want to boost their cordless lawn & garden tools selection, and bringing EGO over will certainly do that.

Consider Home Depot’s relationship with the aforementioned cordless power tool brands. Have you seen how dominant Milwaukee Tool has become in Home Depot’s cordless power tools, hand tools, power tool accessories, and safety product categories? They have a huge presence of Ridgid and Ryobi tools and accessories, with these being house brands both managed by TTI North America. Dewalt and Makita are also very visible at Home Depot, with Dewalt in cordless power tool, hand tool, storage, accessory, and clamping tool sections, among others. Diablo is strongly represented in Home Depot’s power tool accessories section. In case you have forgotten, Home Depot has an exclusive partnership with Stanley and FatMax. They also seem to have an exclusive presence of Empire Level too, with perhaps more products on the shelf now that the brand is owned by Milwaukee.

Over at Lowe’s, they have a very strong relationship with Stanley Black & Decker, especially since Lowe’s stores underwent a reset to heavily feature Craftsman tools. Dewalt, Irwin, and Lenox are also owned by Stanley Black & Decker, with these brands being prominent in Lowe’s tool department. You will find some Dewalt tools exclusive to Home Depot and others (such as Xtreme SubCompact) exclusive to Lowe’s.

But, from what I have seen, Lowe’s does not seem to have as many powerful relationships as Home Depot. Stanley Black & Decker’s Craftsman and Dewalt brands are certainly emphasized offerings at Lowe’s, but Lowe’s doesn’t seem as tightly bound to some of their other brands. For example, it does not appear that Lowe’s features Bosch and Metabo HPT cordless power tool offerings with the same energy as Home Depot does Milwaukee and Makita.

Bringing EGO to Lowe’s stores will be a big boost in itself, but I can’t help but wonder what benefits there might in addition to this.

Like EGO, Skil is a Chervon tool brand, and one that was acquired from Bosch a few years ago. Since then, Chervon has been working to revamp the brand. Did you notice that Lowe’s also announced that they will be offering a selection of Skil cordless power tools? This new arrangement is not just about EGO.

A reader emailed in today, sharing their observation that you can no longer purchase Skilsaw tools from Home Depot. Skilsaw is a pro-oriented arm of the Skil brand.

In my opinion, Skil could definitely benefit from a stronger retail presence, and so I could very well imagine Lowe’s pitching a powerful proposal to Chervon, perhaps one where they express interest in heavily featuring and promoting Skil’s cordless offerings during high-sales volume seasons.

Keep in mind that Lowe’s is EGO’s customer, as well as Skil’s customer. Chervon, the OEM for many Kobalt cordless power tools (I say many because a different brand might be making their 80V Max tools) has an existing relationship.

Does Skil exclusivity sweeten the deal, or does it play a big part?

What I’m trying to say is that Lowe’s could have won EGO over from Home Depot with a multi-faceted deal that would bolster their relationship. Lowe’s can benefit from broadening their cordless power tool and outdoor power tool brand and product selections, and Chervon could benefit from the opportunity to do this.

Chervon and Lowe’s already have an OEM relationship for Kobalt’s 24V Max cordless power tools. This new partnership with EGO would have led to a bigger relationship by itself, but adding Skil and maybe also Skilsaw into the mix makes for an enormous deal.

Was it EGO’s Move?

It is also possible for EGO to have said “hey Lowe’s, buddy, we’re thinking of leaving Home Depot – have you got an advantageous place for us?”

The last time I was at Lowe’s, with respect to cordless power tools, they had select Bosch and Metabo HPT offerings, strong showings of Kobalt and Dewalt tools, and emphasized focus on Craftsman tools. There’s room for another brand in there, and there’s room for a premier cordless outdoor power tools to make Lowe’s a bigger power tool and cordless outdoor power tool destination for shoppers.

Chervon has been expanding their still relatively new lines of Skil cordless power tools. Not to digress, but theirs are very good offerings and I am quite impressed with what they have done in a short amount of time. Then again, Chervon is a very experienced cordless power tools company and so this should not have come as a surprise.

However, their business is almost certainly down. When Sears sold the Craftsman brand to Stanley Black & Decker, and when they started closing down stores and losing online shoppers, that must have hurt Chervon quite a bit. The near-demise of a customer the size of Sears – and I’m specifically talking about Sears from a few years ago – would not have been insignificant.

International Tool went bankrupt, and in the proceedings it was said that “Sears was one of the Debtor’s most significant customers.”

Who is a significant customer of Chervon’s Skil brand of cordless power tools?

Skil looks to be enjoying strong sales at Amazon, but is Amazon a strong enough partner through which Skil could become a strong competitor against the other name brands they seek to match or best? Will Amazon help Skil gain appreciable market share?

EGO is a very well-known brand of cordless outdoor power tools. Will Skil become as well-known if they simply continue on their current path?

Chervon could have approached Lowe’s, saying something like: “Hey Lowe’s, have you seen how well our Skil brand has been selling at [Amazon and possibly other retailers]? We’d like to gain more market share. We would like Skil to be a Lowe’s retail exclusive, and we know how much you’ve been eyeing EGO – we’ll give you exclusivity there too.”

EGO is well-known and quite popular, and with strong brand loyalty where many customers will follow the brand to Lowe’s.

Starting with a selection of tools, Skil will now have a retail foothold. And, it’s not just Skil 12V and 20V cordless platforms, but also Skil’s 40V outdoor power tools lineup. This makes for a very mutually-beneficial deal. EGO is established and can bring customers to Lowe’s, and Skil is a burgeoning brand that can benefit from exposure to Lowe’s customers.

Home Depot has no room for Skil in either their cordless power tool or outdoor power tool departments. While Lowe’s has their existing partnerships, I could see this deal as being something they were sold on.

With Skil 12V, 20V, and 40V Max cordless power tools and outdoor power tools at Lowe’s stores, and EGO cordless outdoor power tools, and maybe Skilsaw tools as well, Lowe’s will be a much bigger customer to Chervon than previously. Let’s also not forget about Chervon and Lowe’s existing relationship involving Kobalt 24V Max cordless power tools.

Or…

Things could have played out much simpler. Perhaps EGO’s exclusivity arrangement with Home Depot was up for renewal and they asked both Home Depot and Lowe’s for proposals. Lowe’s presented a better deal and EGO signed with them, with Skil part of Lowe’s pitch.

Who Cares Anyway?

Some of you might be wondering who cares, why’d you make me read all that? Well, hopefully if you made it this far you found the topic as interesting to explore as I have.

We know what happened, or at least the outcome – EGO tools will be sold at Lowe’s instead of Home Depot.

This is big news by itself, but there’s also a lot more under the surface of this new deal.

We don’t know what led to this, the why, and that’s an important part in understanding the tool industry and the actions of retail titans. Home Depot and Lowe’s are very influential, as are other retail chains of their size. Knowing the why behind brand partnerships can help us understand how brand offerings might change over the years.

Tool brands’ presence and selection at Home Depot and Lowe’s have changed quite a bit over the 10+ years that I’ve been mindfully watching. Understanding what led to this recent partnership transition, and even if that just means exploring possible explanations, could play a part in tracking how it potentially influences future changes.

Which Scenario is Most Likely?

EGO was a strong seller for Home Depot. But, which party stood to benefit most from continuing their former exclusivity arrangement, and which would benefit most from discontinuing it?

Will Home Depot enjoy greater sales by moving EGO out and replacing their offerings with ones from their other cordless power tool brands? If so, which brands will we see gain greater presence – perhaps Ryobi? Which brand(s) would have been customers’ typical alternate choices if they didn’t go with EGO models at Home Depot?

It’s possible Home Depot is resetting their brand selection, but the question is whether it was their initiative to do so, or if it is in response to EGO leaving.

If you ask me, I think there is a greater probability that either Lowe’s offered Chervon an attractive package deal for an exclusivity arrangement, or that Chervon pitched a deal to Lowe’s.

With EGO as successful as they’ve been, would Home Depot have voluntarily dropped the brand from their lineup?

The brief mention of Skil being a part of things – this very strongly suggests a stronger relationship between Lowe’s and Chervon. If Home Depot decided to part with EGO, and Chervon was shopping for a new exclusivity arrangement, why would Skil be introduced into the mix at all?

In my opinion, it comes down to Lowe’s adamantly wanting EGO, or Chervon wanting Skil at Lowe’s. Maybe there’s a combination of factors, or there could be an entirely different decision path that I am unable to conceive given limited public details.

This might not have any consequence on the Kobalt brand, but it could. If the arrangement goes beyond EGO to also include Skil, why wouldn’t it also have some tie-in to Lowe’s OEM relationship with Chervon?

Let’s Hear Your Theories

Some of you chimed in about other possibilities, and I’m hoping you could elaborate on them. The most interesting theory I’ve seen so far is that this move is somehow connected to Craftsman’s outdoor power tool offerings.

What are your thoughts or theories about this new change in partnerships?


Bosch Announces New Cordless Power Tool and Battery System Alliances

$
0
0

Bosch 18V Cordless Power Tool Alliance Brands Hero

It appears that over in Europe, Bosch has struck deals and is now introducing new cordless power tool battery alliances.

At this time, there appears to be two distinct systems – Bosch 18V will power a new 18V Professional System Powered by Bosch product family, and their consumer/DIY platform will be at the heart of a new Power for All 18V Alliance.

As a reminder, this is all in regard to Bosch’s activities and marketing in Europe. No announcements have been made in regard to what Bosch might due in North America.

Let’s rewind things a bit.

Klein Dewalt Powered Cordless Tools

Do you remember Klein Tools launching a new “powered by Dewalt” line of cordless power tools? This seems to be the same type of deal.

Metabo Cordless Power Tool Alliance System

Metabo is also at the center of a Cordless Alliance System in Europe, where their cordless power tool battery is compatible with different brands’ tools.

Home Depot Picture Surebonder Hybrid 120 Cordless Glue Gun Kit with Ryobi battery and charger

Surebonder makes a cordless hot glue gun that is powered by Ryobi’s 18V cordless power tool battery system.

There are lots of these types of products sprinkled throughout the market.

Now, Bosch is ramping up efforts, gaining more brand partners and actively marketing the new system compatibilities.

18V Professional System, Powered by Bosch

Bosch 18V Cordless Power Tool Alliance - Countless More Tools Slide

In their promo video, Bosch says that countless more tools from other expert brands will soon be compatible with their 18V Li-ion cordless power tool batteries.

Bosch 18V Cordless Power Tool Alliance - Batteries Sold

Over 60 million batteries have been sold, and in this slide a Bosch 18V battery sports the new “system” branding.

Bosch 18V Cordless Power Tool Alliance - Trusted System Slide

Bosch’s emphasis that theirs is the trusted system to build on suggests that there’s some competition brewing. Might this have to do with the increased visibility of the Metabo-centered Cordless Alliance System?

Bosch 18V Cordless Power Tool Alliance - Flexibility Slide

The new system is said to deliver maximum flexibility to users.

Bosch 18V Cordless Power Tool Alliance Many Brands

Here’s a look at the brands on-board so far:

  • Bosch
  • Klauke
  • Brennenstuhl
  • Cox (a Sulzer Brand)
  • Wagner
  • Lena Lighting
  • LED Lenser
  • Sonlux

Bosch 18V Cordless Professional System

There’s no mistaking that Bosch will be at the center of things.

Bosch 18V Cordless Power Tool Alliance - Many Tools One Battery System

Many Brands.

Many Tools.

One Battery System.

While it sounds exciting and promising, how will this be different from before? We’re going to have to see where this goes.

Power for All Alliance

Bosch 18V Cordless Power Tool Alliance Tool Brands

There will also be a separate Power for All Alliance, also powered by Bosch, focused on DIYer and consumer tools.

Bosch 18V Cordless Power Tool Alliance Flexibility Around Your Home

The focus here will be on flexibility around the home.

Bosch 18V Cordless Power Tool Alliance One Battery for Your Home

One battery for all your home [tool needs].

At this time, here are the participating brands:

  • Bosch Home & Garden
  • Bosch Home Appliances
  • GARDENA
  • GLORIA House and Garden
  • Emmaljunga epowered by Bosch
  • Wagner
  • Rapid

Gardena, Wagner, and Rapid products are said to be available as of 2021.

In addition to tools from these brands including traditional DIYer home and garden cordless power tools, Wagner makes paint sprayers, Rapid is known for hot air and riveting tools, and Emmaljunga and Bosch collaborated on an electric baby stroller. Bosch household vacuums are also in the mix of brand specialities.

Bosch describes the new Power for All 18V Alliance as one of the largest cross-brand 18V battery systems.

Bosch Power for All Alliance 12V System

Bosch’s DIYer “green” tools sport similar Power for All 12V branding, but this appears to be Bosch branded. At this time, it appears that only the 18V battery system is at the heart of the new Power for All Alliance.

Discussion

Okay, so there’s a new 18V Professional System that builds upon Bosch’s 18V cordless power tool system, and a Power for All 18V Alliance that builds upon Bosch’s European “green” DIYer tool system and adds in other tools and equipment “for your home.”

There are quite a few brands that have existing industry collaborations, and it seems that this number is increasing.

Dewalt’s 20V Max system powers Mac cordless power tools – which makes sense since Mac is also a Stanley Black & Decker brand – but also Klein cordless power tools and a Graco cordless sprayer. There could be other collaborations and cooperative efforts. Dewalt FlexVolt batteries power a collection of Amkus rescue tools.

This makes sense, doesn’t it? Why should traditional corded tool makers build R&D teams to compete with cordless brands, or cordless brands build R&D teams to dive into new product categories, when they could work together. Combining tool know-how with battery system know-how, and everyone wins.

Which cordless power tool brand makes for the best collaborators and partners?

With the emergence of these two new Bosch-powered cordless alliances, and the suggestion of new brands already signed-on and working towards 2021 tool launches, we might be seeing the start of new competition.

Presently, Bosch and Metabo are at the heart of their respective alliances, and the more brands that sign on, the more enticing it will be. C’mon, join the family.

An alliance-powered tool kit could feature Bosch construction tools, a Wagner paint sprayer, and an LED Lenser worklight. Bosch doesn’t have to attempt to market a competing paint sprayer, Wagner doesn’t have to develop their own proprietary battery interface, and LED Lenser applies their existing know-how to develop or co-develop a product that will gain more exposure due its battery compatibility.

It remains to be seen how these new alliances develop, and also if they come to North America. If anything, the Bosch 18V Professional system stands a good chance of being introduced here.

Then, if these multi-brand-compatible systems do take off, how long until other brands actively seek out additional alliances and partnerships of their own?

If Dewalt feels any competitive pressure, I’m sure they could whip up some marketing to highlight their existing brand relationships and solicit new relationships. Perhaps other brands will seek out similar dealings.

It’s going to take time to see what materializes from all this. Yes, it is certainly nice to be able to access the functionality of very different tools without having to buy into incompatible battery and charger systems. But how impactful will these alliances be, even with the current dozen or so brands signed on to participate in the two distinct systems?

Thank you to Hugo for writing in about this!

Bosch 18V Alliance Promo Videos

Robbox xDrill – a Smart Cordless Drill “of the Future”

$
0
0

Robbox xDrill

Behold, the Robbox xDrill, a new “smart” cordless drill that’s designed to make drilling “sooo much simpler.”

Here are the basics: The xDrill features a brushless motor, 21V battery, 0-600/0-2000 RPM gearbox, and “3 hour work rate per charge,” whatever that means.

What’s the max torque? They don’t say.

This is also being described as “the first ever smart drill.”

Robbox xDrill TouchScreen

It’s got a touchscreen, and Bluetooth controls, apparently WiFi, and there’s an app that accompanies it.

Also, lasers!

There are laser distance measuring tools, one on the bottom and one on the front.

Robbox xDrill Laser

The laser on the front can be rotated, enabling it to be aim forward or to either side.

What this means is that you can set your drilling point x-distance away from either wall, and y-distance away from the ceiling.

What about when you need to measure off the ceiling such as when installing shelving? I guess they didn’t think of that?

Their “imagination came up with an auto set feature” where you can set depth control. Once the desired drilling depth is achieved, the drill shuts off automatically. There’s no word as to how precise this is. I suppose yo have to zero the drill for every hole?

Robbox xDrill TouchScreen Level

There’s an on-screen “leveler.”

Robbox xDrill TouchScreen Custom Angle Level

And, you can also set custom angle settings, for drilling at an angle.

Robbox xDrill Smart Speeds
There is a Smart Speed/Torque control where you input the material type and drill bit size, to automatically set the optimal speed for the drilling application.

You can also set things manually if you want. The promo video show the increments as being lb-feet and Nm, and there’s no indication as to whether you can make finer adjustments.

Robbox xDrill App

Here’s what you can do with the smartphone app:

  • Save [laser distance] measurements
  • find your tool
  • Lock drill if stolen
  • Set up user profiles
  • Usage data: runtime, torque, speed,
  • Keep count of how many times you drop the drill

Robbox xDrill Battery Charger Case Add-ons

Add-ons include additional batteries, a charging dock, and an optional case.

Fundraising Price: $399 CAD (~$298 USD)

More Info via Kickstarter

Discussion

The Robbox xDrill is said to be “made for pros” and “amazing for beginners.”

What’s the max torque?

What’s the accuracy of the laser distance measuring features?

Battery charge capacity in amp-hours?

Charging rate?

Ah, here it is:

  • 45 minute charge time
  • 2-3 hours runtime “regular use”
  • 1 hour “vigorous use”

Robbox xDrill Outdated Drill Futuer Drill Comparison

Marketing materials compare it to a corded heavy duty hammer drill as “your old, outdated drill.”

Robbox xDrill Laser

But, the xDrill doesn’t seem to be a hammer drill. Here, it looks like it could be drilling into a masonry wall surface, or is that just drywall, plaster, or something similar?

So, don’t throw away your “old outdated drill” just yet.

I’ve seen and used “smart” tools before. In a drill press, yes it absolutely makes sense to be able to change speeds for different materials and bit sizes. In a handheld drill, I’ve found it to be far less impactful.

The depth control seems neat. But what’s the resolution? Meaning, how well does it actually work? Can I set it to 0.45″? 3/8″? Does it have to be zeroed each time? In that case, shaft collars or a piece of masking tape might work faster and possibly even better.

$399 CAD converts to $298 USD (at the time of this posting). So that’s around $300 for a cordless drill with brushless motor and a single battery.

The xDrill looks flashy, but for the same price you can wait until the holiday season and snag a Milwaukee M18 compact brushless drill kit for $99. Or a higher-powered Ridgid kit for $99. Or one of several Dewalt brushless options for $99. There are also usually Makita, Metabo HPT, and Bosch kits for $99.

With one of those alternate options, you have $200 left in your pocket for a laser distance measuring tool, a torpedo level, box level, and probably also a printer and laminator so that you could keep a drill bit and material speed selector chart handy. There might he some money left there for a corded hammer drill as well, for heavier duty tasks.

A number of people have written in about the Robbox xDrill, and they company also sent a heads-up before the Kickstarter campaign went live.

In my opinion, it could be useful. But, would it be useful enough? Frankly, I don’t think so.

How can you find the tool or lock it if stolen? Is there a replaceable coin cell battery within the tool? Will enabling these functions drain the coin cell or the attached battery over time?

What’s the max torque? Battery charge capacity?

No LED worklight?! On a “drill of the future?”

Not to mince words, the xDrill looks flashy, but the marketing turns me off a little. It seems more like an “as seen on TV” type product than a truly professional tool. It doesn’t seem “made for pros,” it seems “marketed towards beginners.”

Now, some of the xdrill’s features could be handy. Handy enough to warranty the ~$300 USD price tag?

If you want the case, that bumps up the fundraising price from $399 CAD to $449 CAD (~$336 USD). If you want a second battery, the price jumps up to $549 CAD (~$410 USD).

The kit price, with (1) battery, (1) charger, and the case is ~$336 USD. They estimate the retail price will be $669 CAD, which converts to ~$500 USD. Their conversion estimate puts the USA price as ~$488 USD.

Milwaukee One Key M18 Fuel Brushless Drill

If you want a “smart” drill, Milwaukee’s One-Key cordless drill offers some of the same speed and torque customizations, and other app features.

Compare: Milwaukee One-Key Drill Kit via Tool Nut
Compare: Milwaukee One-Key Hammer Drill via Tool Nut

I’ve used drills with built-in bubble levels, and with LED level indicators, and it’s not something I would look for in my next drill.

The xDrill’s more enticing features aren’t described in enough detail to sell me on them. There’s a lot of flash, but I need more substance.

Is the xDrill drop-tested? I’d hate to drop it off a ladder and find the touchscreen shattered.

Robbox xDrill

Wait – is there no manual clutch dial? Granted you can set speeds and torques through the touch display, but a good ol’ fashioned clutch dial might be faster and easier to use. It looks like you get a clutch dial, but there are no markings. It doesn’t look like a two-handed keyless chuck, but more details would be needed for full confidence.

Robbox xDrill Dancing Demo

After the dancing segment of the promo video…

Robbox xDrill Keyless Chuck

They only show the keyless chuck being turned a hair for a split second, and so I can’t tell you if the xDrill has an unmarked clutch dial or if it’s part of the chuck, or if it’s just textured for decoration.

Why 21V? 3.6V Li-ion cells x 5 = 18V. At max voltage, right off the charger, you’ll usually see 4.0V x 5 = 20V “Max”. 21V. Are they figuring 4.2V Max x 5 = 21V Max? That seems like the most likely explanation.

I guess 21V (or maybe 21V Max) is meant to sound better than 18V or 20V Max?

At the surface, the Robbox xDrill seems like a marvel. But looking at the details, I’m not yet impressed. Notice that I said yet. My stance could potentially change if the marketing was less flashy, the price was lower, or it promised more performance-related features and functions for what it’s expected to cost.

Robbox xDrill

I’m also not loving the color scheme, but that’s subjective. Are there enough cooling vents?

Dewalt Atomic Brushless Drill DCD708

In comparison, the Dewalt Atomic 20V Max brushless cordless drill has way more air vents.

Promo Video

Shortcuts: I Wasted an Hour to Save 5 Minutes

$
0
0

Engineer Solder Sucker Desoldering Pump in Use

Before we get started, I’d like to give a thumbs up to my tool of the day, the Engineer Inc “Solder Sucker” desoldering pump!

Okay, here’s what happened. A few days ago I got fed up with the “enter” key on my keyboard, as it had been sticking. I must have spilled something on the keyboard at some point, because it was literally sticking a little with each keypress.

This wasn’t the primary enter key, but the one on my number pad, and so it saw consistent but less regular use. Still, it bugged me.

I took the keycap off, which you can easily do on a mechanical keyboard, and tried to clean under it.

Didn’t work.

I tried cleaning different parts on and around that enter key for the next couple of days.

Didn’t work.

Today, I removed the keycap and then its stabilizer parts. When you have a large key, such as the “enter” key, spacebar, or shift keys for example, they have an electromachanical switch and stabilizers on either side.

Aha, things were a little gooey at the bottom, and so one of the stabilizers were sticking to the PCB underneath every couple of presses. It wasn’t a big deal, but the slight disturbance struck a nerve and frustrated me.

A little swab with alcohol and everything was clean, right? Yep. Nicely done, I mentally patted myself on the back.

Now, to put it back together…

Uh-oh. Everything released and popped out easily, but I couldn’t get it to pop back together.

I struggled, I searched for YouTube videos, I struggled some more, and finally I gave up.

As soon as I watched the first out of two or three videos, I realized that removing the enter key’s switch, stuck in the middle of where the stabilizers needed to go, would make for easy reassembly.

But I didn’t want to have to desolder the key and the resolder it back together. All that work for a 30 second re-lube and reassembly operation? Surely I could figure out a way to make things work.

So, I spent maybe an hour, hour and a half, trying to find a way for things to clip together, including the initial struggling before I took to YouTube. It only took a moment to take things apart, surely there was a way to put it all back together quickly and easily, and without soldering, right?

In the end, I pushed things out of the way on my bench, plugged in my fume extractor, plugged in my soldering iron, retrieved my solder (which I keep out of reach in case my kids explore the cabinets unsupervised), grabbed my Solder Sucker desoldering pump, and got to work.

I removed solder from two dummy holes (since there’s no LED in these keycaps), removed the two switch keys, and the switch came out fairly easily.

I reassembled the stabilizers, installed them in the keyboard in a matter of seconds, resoldered the switch to the board (I had to do this twice as it wasn’t perfectly flush the first time), put everything back together, and everything seems to be working.

I had some cleanup to do, and the tubing tip of my Solder Sucker required a toothpick to extend its lift. Without those setbacks, everything took a maybe 5 minutes to do.

I was so hesitant about the hassle it would take to set up for and clean up after desoldering and soldering, that I spent more than 10X longer trying to “save time.”

This wasn’t the first time a shortcut backfired, and it won’t be the last.

Well, at least I know for next time time that there’s no way to reassemble keyboard rstabilizers without involving soldering. And hey, *knock on wood* nobody got hurt and I didn’t break anything.

Have you made similar mistakes, with tool-related shortcuts that took longer than the “right path” you ended up having to take anyway?

Engineer Solder Sucker

Now, about that Engineer’s Inc Solder Sucker – I’ve got some other desoldering tools in my kit, but this one see the most use. It’s not perfect – it can be an ergonomic mess at times due to its small size, but it gets the job done when it matters. I also think it’s too pricey for beginners though. If you’re just getting started with soldering, buy something cheaper – a basic desoldering pump or desoldering wick.

I bought one of these desoldering pumps from I Heart Engineering (sadly now defunct) back in 2013, and another from Adafruit back in 2014. So far, so good.

Buy Now via Amazon
Buy Now via Adafruit (Better Pricing)

Alternative: Edsyn via Amazon

Edsyn makes a very good (and very large) desoldering pump for around the same price. If you’re feeling cheap, a bunch of companies offer knock-offs for less. The Edsyn is made in the USA, the knock-offs are not.

The Coolbox Tool Box Became an Entertainment Cooler

$
0
0

Coolbox Tool Box 2020

Do you remember the Coolbox, the “world’s most advanced tool box?” It was a crowdfunded tool box with a built-in rechargeable battery, power cord, bottle opener, LED flood light, USB charging ports, Bluetooth speakers, and more.

Back in 2015, the Coolbox was offered via Indiegogo, for $179 for backers that missed the early adopter price of $169. The $179 was said to reflect $120 savings, which suggested an eventual retail price of $299.

Fast forward to 2020, and you can now buy the Coolbox on Amazon, for $150 including shipping.

Buy Now via Amazon

The current version is a little different, featuring an 11.1V and 3Ah rechargeable battery, rather than the 20V and 5Ah battery originally advertised. It does not look like much else has changed.

But wait, there’s more…

Coolbox Entertainment Cooler

There is also now a Coolbox Entertainment Cooler, available in blue, green, and white.

Instead of a powered tool box, the Coolbox is now a cooler.

It features a rechargeable battery, clock, smartphone and tablet holder, USB charging ports, marine-grade speakers, Bluetooth music streaming connectivity, rubber wheels, top and side handles, and a drain plug.

The Coolbox cooler can hold up to (22) 12 oz cans with a 2-to-1 ice ratio, “so you can maximize your chill.”

There was apparently a crowdfunding campaign for the Coolbox Entertainment Cooler as well, back in 2018, with a speical price of $169. The retail price was expected to be $299.

The design looks to have changed a little bit, with the current retail model looking to sport fixed side handles rather than a telescoping handle.

The Coolbox cooler is currently available on Amazon for $180. It’s an interesting progression, and I have to say – the Coolbox makes a lot more sense as a cooler than a “cool advanced tool box.” Now, the cooler is the Coolbox and the tool box is simply a tool box.

Price: $180

Buy Now via Amazon

And, here is one of the world’s most obnoxious introductory videos:

The New Harbor Freight Tools… Credit Card?

$
0
0

Harbor Freight Credit Card

Harbor Freight sent out a newsletter today, introducing their new credit card.

Credit card? Yep, it looks like there’s a new Harbor Freight store card. There are some interesting perks for frequent shoppers.

Harbor Freight Credit Card Cash Back Offer

First, you get 5% back on everything, in “Harbor Freight Money,” which is basically store credit certificates.

Harbor Freight Credit Card Financing Offer

They also have 0% interest financing offers, involving equal monthly payments.

You get 6 months, 12 months, or 36 months of 0% interest financing, depending on the purchase amount.

Here’s an example of how this works:

Harbor Freight Credit Card Equal Payments Example

A purchase of $300 (including tax) gives you 6 months of 0% interest, and requires equal monthly payments of $50.

They say that if you miss a payment, you might be charged a late fee, including interest on the late fee.

Also:

If you have other balances on your account, this monthly payment will be added to the minimum payment applicable to those balances.

And also:

These payments equal the total equal pay purchase amount divided by the number of months in the equal pay period, rounded up to the next whole dollar. These payments maybe higher than the payments that would be required if this was not an equal pay purchase.

Harbor Freight Credit Card Opening Offer

Lastly, there’s a 10% discount on your ENTIRE FIRST PURCHASE, NO EXCLUSIONS. However, reading the fine print makes it clear that you get a 10% first purchase discount OR interest-free “equal pay option.” You have to choose.

Ouch, don’t look at the interest rate.

For new accounts: As of 6/1/2020 Variable Purchase APR is 25.99%. Minimum interest charge is $2. This APR will vary with the market based on the prime rate. Existing cardholders: See your credit card agreement terms.

At this time, there is no annual fee.

You can apply for the credit card in-store, and you can only use it in-store and NOT online, at least not yet.

Harbor Freight says that you can combine discounts: Use your Harbor Freight Money reward certificates with all other coupons & discounts.

The new Harbor Freight Tools credit card is issued by Synchrony Bank.

More Info via Harbor Freight

Discussion

Note: I am NOT a financial professional. Anything said here should be construed as my opinion and NOT as any sort of advice. These are not recommendations, read at your own risk.

For comparison purposes, let’s look at Chase, a bank that issues VISA credit cards. One of their current public offers features:

  • $200 bonus after you spend $500 in the first 3 months
  • 5% back in grocery store purchases (excluding Target or Walmart) up to $12K spent in the first year
  • Unlimited 1.5% cash back on all other purchases
  • Low intro APR (quoted below)
  • No annual fee

Chase Freedom Unlimited APR info:

0% intro APR for 15 months from account opening on purchases. After the intro period, a variable APR of 14.99%–23.74%.

There’s a whole page on Chase’s terms, and it says:

14.99% to 23.74%, based on your creditworthiness. These APRs will vary with the market based on the Prime Rate.

And looking at a public Citi Bank credit card offer:

Earn 15,000 bonus points after you spend $1,000 in purchases with your card within the first 3 months.

Purchase and Balance Transfer Rate:
0% Intro APR on purchases and balance transfers for 15 months; after that the variable APR will be 13.49% – 23.49%, based on your creditworthiness.

Harbor Freight’s APR is 25.99%.

I have a Synchrony Bank store card to somewhere else, and the APR is 29.99%. You can be sure that I pay that bill on time and in full any month I use it. I use that store card on occasion, and I have rules for its use, lest it become a trap that costs me more money than it saves.

Credit cards could be pitfalls if used irresponsibly.

I think that some Harbor Freight customers might benefit from a store card like this. However, there will also be customers that might end up paying more than if they had used a credit card with different payment terms.

In their email, Harbor Freight says:

The Harbor Freight Credit Card gives you even more value—a great way to purchase the tools and equipment you need and you get to choose the credit offer that’s best for you.

Store credit cards are not good values for everyone. Tread carefully.

New Milwaukee Tool Multi-Functional Neck Gaiter Doubles as a Face Mask

$
0
0

Milwaukee Tool Neck Gaiter Face Mask

Milwaukee is soon coming out with a new multi-functional neck gaiter, providing users with face, head, and neck protection.

The new Milwaukee Tool neck gaiter is made from a moisture-wicking and breathable blend of lightweight polyester and spandex. It’s designed to keep users dry and comfortable, and has UPF 50+ sun/UV protection. It’s said to feature odor-resistant technology.

Milwaukee Neck Gaiter Usage Examples

The gaiter can be worn as a face covering, headband, neck guard, or worn in a combination of ways.

Milwaukee Tool Neck Gaiter Face Mask Colors

It will be available in 3 colors: gray, hi-vis, and red. Yes, it’s washer and dryer-safe.

Milwaukee Tool Neck Gaiter Colors

  • Gray: 423G
  • Hi-Vis: 423HV
  • Red: 423R

Price: $15
ETA: September 2020

Compare: Mission Gaiter via Amazon
Compare: Mission Half-Face Gaiter via Home Depot

Discussion

This type of product isn’t new, but neck gaiters are also increasing in popularity due to the COVID-19 pandemic and mandates for the public to wear face coverings.

Milwaukee-branded neck gaiters give you more options, and in jobsite-friendly and brand-loyal colors.

Prior to ordering reusable cloth face masks, I tried to wear my winter neck gaiter as a face covering, but it didn’t go over very well. You see, my gaiter is winter-weight and not very moisture-wicking, and it’s thick due to being multi-layered. Milwaukee’s new multi-functional gaiters look to be thin (and lightweight) and stretchy, and seem to be made of athletic-type synthetic materials, which should make them as cool and comfortable as a piece of fabric wrapped around your face could be.

Face masks also seem to shift around on my face a lot, and those are usually so tight that they hurt my ears. If you need to cover your mouth and nose, whether due to regional mandates or personal safety preferences, something like this is probably going to work a lot better for active individuals, which is usually the case for anyone working outside. Plus, you shouldn’t get that damp cloth-on-your-face feeling once you start sweating.

The price seems fair.

September seems a little late in the season to introduce a summertime-focused cooling workwear product, and so the question is whether the pandemic delayed the launch or sped it up. Given Milwaukee’s deeper foray into workwear products, this seems like something they were always going to come out with.

Bantam Desktop CNC Mill – Fresh Thoughts (Hands-Off)

$
0
0

Bantam CNC Milling Machine

Earlier this month, I posted about how Bantam Tools is coming out with a new desktop CNC milling machine.

Bantam is now hailing their new product as the best affordable CNC machine (via ads on Google), and I must admit, it does have some appeal.

I’m not a fan of the high price, or that some features require an added paid subscription.

Their marketing hasn’t really done much to make the machine more compelling over the few weeks since the new machine was announced, but maybe the COVID-19 pandemic is limiting things.

I want to see more case studies, more examples of what it can do, and more “showing” than “telling.”

The idea of a “tell your friends, make money” referral program also seems odd for what’s supposed to be a professional tool. But, they’re not very in-your-face about it and so I suppose it’s okay.

Since its announcement, I have not taken any closer look at the new Bantam Tools desktop CNC milling machine, but I have researched some of their competition and also much higher-priced solutions. I have also thought about the motivation and direction of the company.

I have been thinking about the pricing quite a bit.

When buying a professional machining center, some manufacturers will nickle and dime you until the final price is so much higher than the base. This is true for a lot of commercial products.

I recently ordered an ergonomics computer chair, and the price shot up with every option. The same happens when you go car shopping.

I don’t like the idea of subscription model software, at least when it comes to something like tool-related hardware support. If you need to unlock features on professional test equipment, you pay a one-time fee.

Commercial and productivity software, and also some software that intertwines with hardware such as test equipment, sometime do require a subscription model rather than a one-time fee. Some companies offer you the option of paying a subscription or a lump sum for x-amount of free updates and included support.

Time will tell whether the new Bantam machine’s premium features will be worth the $199-per-year subscription fee. For commercial users, perhaps. But for individuals, inventors, or small businesses?

What about the $4000 sticker price and $3600 introductory price?

Bantam Tools’ PCB milling machine, their smaller and earlier electronics PCB-focused machine, is currently priced at $2499 for the basic model. The same machine with advanced accessory bundle is priced at $3299. These machines are currently out of stock, and their pages seem to have been buried a little on Bantam Tools’ website, perhaps temporarily or tied to being out of stock.

Years ago, when the Other Machine Co first released the Othermill, before Bre Pettis bought the company and changed the name, their cute little machine was priced at just $1500.

After talking to the brand representative at Maker Faire, I scribbled some notes onto the info card they were giving out. The machine was to be priced at $1500, feature replaceable parts, and would launch in January 2014. It would have an ER 11 collet and a vacuum adapter was said to be coming.

Fast forward to 2017, when Bre Pettis of Makerbot fame – or infamy depending on who you’re talking to – acquired the Other Machine Co, a press release at the time priced their Othermill Pro milling machine at $3100.

The price of the pro-version PCB milling machine had greatly increased from when it launched. Another article about the acquisition priced the basic machine at $2199.

While I was very strongly interested in the machine at first, I was never convinced it was a right fit for me, and once the PCB prototyping emphasis emerged, that was it for me. I followed some of the PCB milling machine’s progress over time, but lost personal interest – it was too high priced and I wasn’t convinced it could machine any metal parts outside of teeny tiny trinkets.

I also watched Makerbot 3D printing innovations over the years. Here is some of our past Makerbot coverage:

Makerbot was acquired by Stratasys in 2013. Fast forward to today, they have a couple of seemingly new machines aimed at educational and engineering customers. I say seemingly new because I stopped paying attention to the brand. The pricing of Makerbot 3D printers have greatly increased compared to those that made the brand popular with makers and hobbyists back in the day.

Bre Pettis left Makerbot prior to acquiring Other Machine Co.

How is Pettis steering Bantam Tools?, I wondered.

Yes, the price of Makerbot 3D printers greatly increased under Pettis’s leadership. But the pricing on this new Bantam desktop CNC milling machine doesn’t seem to be his influence.

If you want more machine, the price goes up. That’s true with 3D printers, CNC milling machines, and all manners of non-automated tools and equipment.

The $3600 promo price and $4000 full retail price on the Bantam Tools desktop milling machine does not seem out of line with how the PCB mill is priced, and the former Othermill increased in price from when it launched and before Pettis acquired the company.

After my post about the newly launching Bantam Tools desktop CNC milling machine, I received an email from what I could only describe as a competitor.

I won’t copy the entire email here, but here’s the start of it:

I came across a guide you did for the Bantam Desktop machines and we would like to see what kind of commission deal we can work out for a similar review.

Their machines are:

built like a true floor model CNC with cast tables, bases and columns, along with durable steel enclosures.

Their goal:

We’re looking to grow our hobbyist and manufacturing market on top of our already growing educational market.

I took a look at their $5500+ “turn key” CNC milling machine. They’re coming out with some accessories, and tout that the machines are manufactured in the USA.

But, despite a dramatic absence of clear imagery, I spotted some strong resemblances to imported milling machine components. I did some background research, and according to the internet community, this company converts a variant of off-the-shelf machines and builds enclosures for them. There is definitely a benefit to this approach.

I also rewatched Bantam Tools’ videos and introductory marketing materials.

Obviously they want to sell machines and make money, but the question is this – what are they going for? What is their goal?

Does Bre Pettis want to put a CNC machine in every home? Well, he can’t. Below a certain price level, you lose on power, accuracy, working volume, finish quality, and so forth. Is $4000 (after the introductory price) the best they can do? Doubtful.

Carbide 3D’s Nomad machine is less expensive. Inventables’ Carvey doesn’t seem to be sold online anymore (or at least I couldn’t find any current price or purchase links), but if I recall correctly it was priced in line with the $2500 Nomad.

There are other desktop machines on the market, with most being router-type setups equipped with woodworking router motors or spindles.

As I mentioned in the other post, I am especially interested in the desktop CNC market and have been watching developments for quite some time. Recent workshop cleanup activities turned up printouts for DIY CNC plans from 2009, when I thought there was a possibility I could build a small machine for myself, but ultimate the component costs pushed my plans back. It would be a decade before I could have a taste of hobbyist-grade CNC benchtop cutting.

The Bantam Tools desktop CNC machine is a potentially large market, but very few options are presently available. For serious machining, you need a very large machine capable of handling steel. A benchtop machine isn’t going to do that, or at least not one that weighs as little as the new Bantam machine.

Bantam says their new machine weighs 70 pounds, and it “doesn’t require an engine hoist to install.”

I’d like to buy a benchtop milling machine, and possibly a lathe. In addition to better machines costing more, they often require an investment and a large footprint, and that’s before any CNC conversion considerations. Personal CNC milling machines are even more expensive.

Benchtop CNC routers can be upgraded and tuned to handle aluminum, but there are a lot of limitations.

Meanwhile, the new Bantam desktop milling machine is said to specialize in cutting aluminum, and to me that does make it appealing. It’s not a “sure, you could cut aluminum (but not at the quality you might be looking for)” type of claim, but “we designed this for aluminum.”

Does it introduce a new standard for desktop CNC machines? In theory, I think it might provide a strong balance between size and capability, but that remains to be seen. They also look to offer to hold users’ hands a bit, which will be necessary for getting non-machinists to use it.

I bought a 3D printer a few years ago and sent it right back because the darned thing couldn’t even do the test print. Designers and other users won’t be drawn to this machine if it requires them to become an expert in its use before it can produce good results.

The main selling point so far is for engineers and designers to “prototype your product in-house” and to make it easier to iterate.

I think it might miss the mark on the type of machine I have been looking for over the years – a benchtop tool that can make functional parts out of aluminum and of sufficient size. For that I might need to budget the space and setup for a benchtop machine, no reasonably-priced small CNC seems to have come close. The benchtop manual mill one I have had my eye on costs much less than the new Bantam Tools desktop CNC, and that’s including a 3-axis DRO option and ballscrew conversion kit for potential CNC adaptation. But, it weighs 370 lbs and while it can work with 120V 20A circuits, variable speed motor drivers sometimes (often?) don’t work well with GFCIs. Such a machine might be an eventuality, but for larger parts.

For smaller parts and components, Bantam Tools’ new machine looks like it could be a dream for inventors, designers, or small companies.

Thinking of toolmakers specifically, smaller outfits usually send out for their machining needs. Larger companies might have in-house fabrication, but are designers and engineers able to disrupt production workflow to test different design ideas? Larger brands have equipment dedicated to prototyping needs, and skilled workers to operate them.

If this machine is well-designed, easy to use, and capable in its machining, it could very well gain traction. Personally, I’d like to see them offer more options – the personal CNC milling machine space can certainly use more competition and innovation!

Hopefully Bantam also has a roadmap of accessories planned out for the machine, time will tell. As an aside, I wonder if the subscription software model could be made more attractive by giving premium subscribers a discount on future add-ons or accessories, or savings on tooling or sample materials. Just a thought.


The Number of Tools I Need vs. How Many I Have

$
0
0

Tools owned vs Needed

I like to make stuff. Early frustrations led me to become somewhat fixated on doing things “the right way,” which meant getting the right tools.

There was a time when I tried to cut oak board with a cordless drill and a Dremel rotary tool, and another time when I tried to round-over a pine board with a Dremel and a sanding drum. This was maybe 16-17 years ago or so.

Much earlier than that, I bought small plastic circles at a local supplier, and I struggled to drill holes perfectly through their centers. I mounted them to servo horns for use as robot wheels. My little robot wobbled a little as it moved. Honestly, I don’t think I’ve gotten much better at drilling holes perfectly through the centers of plastic circles, but I picked up plenty of tricks over the years to fine-polish the results.

I have gotten way better at improvising over the years, both in terms of seeing creative (and safe) solutions and allowing myself to go against my strong habits and personal tenancies.

But should probably have more tools than I do. I bought a couple of “dream tools,” such as my Woodpeckers router table, and a floor-standing drill press, with both crushing most of the project needs and wants I had before I purchased them.

But in addition to the metal-working machines I’ve been wishing for, I’d love for a horizontal band saw, cabinet table saw, and wood jointer. I have a Dewalt planer review sample still on-hand, and an entry-level woodworking band saw, plus a basic dust collector I bought when I convinced myself that *something* was better than *nothing.*

I’ve got big eyes. Jobsite tables saws get me through some projects in the meantime. I try to buy relatively straight or planed-down wood for projects. I have some hand tools for light board flattening, although I still haven’t gotten around to planning or building a solid woodworking bench yet.

It seems that regardless of finally being able to purchase what I want and need, there are always obstacles. Space. Electrical requirements. Space.

Part of the reason I’ve been on a cleanup spree recently is to assess what I’ll have space for. The other part is to make more effective use of the tools I have, with different stations and easily-retrievable bins or tool boxes of like-themed tools and supplies.

Better organization won’t help me close the gap between my current needs and wants and what I have at my disposal, but it’ll be a good start.

I look at benchtop tools every so often, but there are so many compromises. Even before the rise of 3D printers and benchtop CNC routers, brands seem to have stopped caring about bringing good benchtop tools to market.

When’s the last time Ryobi introduced any new hobbyist tools? A better disk sander? A better drill press? What about Craftsman?

Back before Sears’ demise, I was at a Craftsman “show and tell” holiday preview event, or something similar, and a product manager was showing me their new line of premium-quality circular saw blades. We ended up talking about benchtop tools, as even then I noticed a decline in selection and quality, and he mentioned that he was hoping to revamp their benchtop drill press and were in the process of trying to find a good supplier.

Sure, you can buy a benchtop jointer, but the consensus of the woodworking internet community is that they’re not very good. I *might* be able to budget for a 6″ jointer, which runs off 110V power, giving me flexibility, but of course the widespread opinion is that everyone regrets their 6″ jointers and wishes they went with 8″ machines to start with. In addition to higher pricing and longer tables, 8″ jointers often have 220V power requirements.

I went with a basic Jet dust collector after being paralyzed by more premium choices over the years, hung up on their space and electrical requirements, and so far it seems to have been a reasonable choice. Maybe I could or should just try a tiny straight knife or “helical style” benchtop jointer before committing to a floor-standing model. But, I really hate buying tools twice.

Trying to figure out where things will go, and acknowledging that some tools might require workshop upgrades, has created decision paralysis for me.

I’m giving myself limits. One cannot have everything or do everything.

But how do I choose between say metalworking or woodworking machines?

I tend to really like using 80/20 t-slot aluminum for workbenches, jigs, and other needs. “But you know you could weld together something made out of steel for cheaper.” Yes, but I don’t own a welder, I haven’t learned how to weld, and even if I checked those two things off the list, I don’t have the space for such activities, not yet at least.

It’s easy to lust after the workshops that some YouTubers have, with some even having enough space for dedicated woodworking and metalworking shops. In theory I could set up an industrial space somewhere, but such investments would likely leave ToolGuyd without the means to purchase tools and equipment I’d want the space for.

I’ll be researching my next piece of equipment, and will likely hold off until my workshop is spotless and empty of everything that doesn’t belong. Maybe I’ll snag a good deal around the holiday season.

Part of the headache with all this is that some tools’ functionality can be duplicated, albeit not quickly or easily. Do I need a cabinet-style table saw? No, I could get buy with other types of saws in the meantime, although having a permanent table saw setup would likely yield faster, better, easier results.

Do I need a jointer? No, but it would make a lot of things easier.

Do I need a milling machine? That might fill more non-overlapping needs, but less often than say a table saw.

When I was younger, I had to pick and choose what I could budget for, growing my tool kit slowly over time. Now, I still have to budget cautiously, but space is a bigger limitation.

I often see people talking about setting up their retirement shops to their liking, but my project list has been growing steadily over the past few years, and I’m nowhere near retirement.

It might seem like I’ve fallen into the trap of chasing “the next acquisition,” and that can be a problem at times, but only once ever few months. More often than that, I run into “darn, I don’t have the tools to make what I need” types of situations.

Smaller tools are easy. The other day a reader gave me the itch to buy a powered desoldering tool, and I expect it to be delivered sometime next week. I don’t plan to use it every week, but it’ll be easy enough to store out of the way between uses. Table saws, jointers, milling machines, lathes, band saws, sheet metal brakes or shears – tools like these have a footprint and command floor space, not to mention size investments.

I won’t let it bother me though. I’ve been cleaning up, and there’s more to do, but it’s been liberating already. I’m going to focus on the things I can do, and not be occupied by the things I need and want but cannot have yet. Still, oh how I wish I had access to a good makerspace or hackerspace.

Tool of the Day: Gaffer’s Tape

$
0
0

Pro Gaffer Tape

Gaffer’s tape is fantastic stuff!

It’s not quite the hybrid child of duct tape and clean-release masking tape, but perhaps that gives you good idea of what you’re dealing with.

It’s grippy, but doesn’t leave residue, at least not from most of the surfaces I’ve tried it with.

I resisted buying gaffer’s tape for a while, despite hearing great things about it, for one reason – it’s pricey. I bought my first roll a couple of years ago, and recently ordered a couple more rolls from Amazon.

Gaffer’s tape is usually available in 1″, 2″, 3″, and 4″ sizes. If you start with a larger piece than you need, that’s okay, it tears easily.

Don’t let the name or film and theater industry focus throw you off, this is great tape that can be used in all kinds of holding tasks and applications.

I like Pro Gaff tape, which features:

  • Coated cloth backing
  • Synthetic rubber adhesive
  • 50 lbs per inch tensile strength
  • 11 mil thickness

A 1″ x 55 yard roll is priced at ~$12, and a 2″ x 55 yard roll is priced at ~$22. Some colors seem to be priced a little higher, and others a little lower.

This particular brand is made in the USA.

Buy Now via Amazon: 1″
Buy Now via Amazon: 2″

The only thing I regret about these tapes so far is waiting so long to buy it. I tend to use duct tape for general purpose stuff, and gaffer’s tape when I need a little more texture and residue-free removal.

The residue-free removal works on most surfaces, and so far I’ve only tested it on hard solid surfaces. I wouldn’t recommend putting it on painted surfaces or other such surfaces where removal will cause damage. Although yes it could be considered a temporary tape, it’s also very strong and tacky. You have been warned.

Deal of the Day: Dewalt FlexVolt Saw Bundles, Ridgid & Ryobi Cordless Power Tools (8/3/2020)

$
0
0

Dewalt FlexVolt Circular Saw and Drill Deal Bundle

Over at Home Depot, today’s deals of the day features a great selection of cordless power tool kits, bundles, and special buys.

The focus is on Dewalt FlexVolt, Ridgid 18V, and Ryobi 18V cordless power tool systems, and there are some other tools mixed into the deal, such as a Dewalt stud finder and torpedo level bundle.

For the sake of brevity, I’ll only focus on the 3 main deals that caught my attention, but the promo includes many more than that.

See the Deals via Home Depot

The Dewalt FlexVolt cordless power tool bundles are worth looking at. On sale are FlexVolt circular saw and reciprocating saw 2-battery kits, with a bonus impact driver or 3-speed hammer drill bundled in. You spend a little more than the regular kit price to get the hammer drill.

The 2-battery saw kits are typically $379. The deals with a bonus impact driver are $379, and the ones with the bonus hammer drill are $379.

Compare: Circular Saw Kit via Acme Tools
Compare: Reciprocating Saw Kit via Acme Tools

Ridgid 18V Cordless Router Bundle

Some of the Ridgid cordless power tool deals also caught my attention, such as this Ridgid 18V Octane router plus Bluetooth compact 3.0Ah battery and charger bundle set, priced at $179.

The non-Octane-branded router is typically $129, and so here you get an amped-up kit for $50 more. Looking at Home Depot’s listings for the non-Octane model, they had the router and 1.5Ah battery bundled together for $178. So for $1 more here, you get double the battery capacity plus a charger.

Ryobi Cordless Flex Shaft Tool Bundle

There are some Ryobi cordless power tool deals sprinkled in as well, such as this cordless flex-shaft tool kit for $99.

See These Deals and More via Home Depot

Deals end at 3am ET 8/4/2020 unless supplies sell out sooner.

New Milwaukee M12 Fuel Oscillating Multi-Tool – Worth the Wait?

$
0
0

Milwaukee M12 Fuel 2526 Oscillating Multi-Tool

Milwaukee has announced a new M12 Fuel cordless oscillating multi-tool, model 2526, featuring a tool-free blade change interface, brushless motor, 12-setting speed dial, built-in LED worklight, and some strong claims about cutting speed and vibration.

Milwaukee M12 Fuel 2526 Oscillating Multi-Tool Cutting Speed Comparison

To start off, Milwaukee says that their new M12 Fuel oscillating multi-tool is the fastest, besting competitors in cutting applications.

Milwaukee M12 Fuel 2526 Oscillating Multi-Tool Vibration Comparison

And, they say, it also performs with the lowest full-tool vibration.

Milwaukee M12 Fuel 2526 Oscillating Multi-Tool with Sanding Pad

Press imagery shows the tool equipped with a dust collection port. We contacted Milwaukee to ask whether this is included or an optional add-on, will update the post once we hear back.

Dust collection is an increasingly important feature, and in this case it looks to be nicely integrated, with the vacuum attachment angled out-of-the-way. It also appears to be adjustable.

Since the dust attachment is not included in the kit imagery, I’m assuming it’s an optional accessory.

Milwaukee M12 Fuel 2526 Oscillating Multi-Tool Blade Change

The tool-free blade change mechanism looks to feature a flip-up lever and removable locking pin, which would enable it to be compatible with a breadth of different 3rd party blades and accessories, including those with full rings. The tool will of course also be compatible with Milwaukee’s own accessories.

Milwaukee M12 Fuel 2526 Oscillating Multi-Tool Kit

Milwaukee M12 Fuel Oscillating Multi-Tool Features & Specs

  • Brushless motor
  • Tool-free blade changes
  • 10,000 – 20,000 OPM
  • 3.9° aggressive oscillating angle
  • Vibration-dampening technology
  • 12-setting speed dial
  • LED work light
  • 11.2″ length
  • Weighs 3.2 lbs with battery

Milwaukee says that the vibration dampening technology minimizes vibrations throughout the entire tool, and not just the handle.

The M12 Fuel multi-tool is designed to handle typical plunge cutting tasks, nail and grout removal tasks, sanding operations, and is said to cut through bolts with ease.

With an M12 XC 4.0Ah battery, the multi-tool can make up to (54) 1″ x 2″ cuts in oak or (65) 1″ x 2″ cuts in pine.

The kit (2526-21XC) comes with the tool, 4.0Ah battery, charger, carrying bag, (1) multi-tool sanding pad, a sampling of sandpaper from 60 to 240 grit, and a universal fit Open-Lok wood-cutting blade.

A bare tool (2526-20) will also be available.

Price: $149 for the bare tool, $219 for the kit

ETA: September 2020

Buy Now: Bare Tool via Acme Tools
Buy Now: Bare Tool via Tool Nut

Buy Now: Kit via Tool Nut
Buy Now: Kit via Acme Tools

Discussion

Shortly after Milwaukee acquired Imperial Tools, an oscillating multi-tool accessory maker, I hoped and was very certain that new oscillating multi-tools would be in the works.

When I asked about what other possibilities this [acqusition] could provide for, I was told that Milwaukee Tool “will continue to evaluate and pursue product plan extensions that complement core Imperial Products.”

That part was in response to my questioning (it was more thinking aloud) as to whether this means we will see new Milwaukee M18 Fuel and M12 Fuel oscillating multi-tools. Milwaukee currently offers an M18 oscillating multi-tool, which earned a Best Value badge from me in a 2013 comparison, but readers have been asking about the potential for brushless M18 and M12 models for some time.

With Milwaukee Tool having acquired Imperial Blades, and now able to tap into a continued revenue stream from oscillating multi-tool users, I am convinced that we will see new M18 cordless multi-tools, likely brushless with M18 Fuel designation, in addition to new high-performance oscillating tool accessories.

I had considered/hoped/wrongfully predicted that we might see this launch last year. Last year, in my NPS19 new tools prediction post, I said:

We’ve started to see new Imperial Blades oscillating multi-tool accessories. Now’s a good time for an M18 Fuel oscillating multi-tool, maybe even an M12 Fuel model, of course supported by new Milwaukee oscillating multi-tool blades and accessories. Or, maybe they’ll be supported by Imperial Blade accessories. Either way, I expect to see both.

We haven’t reported on it yet, but Milwaukee recently announced new Universal Fit Open-Lok oscillating multi-tool blades. And now, here’s a new M12 multi-tool that works with those blades and fills in a gap in Milwaukee’s brushless cordless power tools lineup.

The tool itself looks appealing, especially from a competitive standpoint.

I know many readers will be hoping for a new M18 Fuel version to follow, and one very well might, but there are merits in an M12 Fuel oscillating multi-tool. Yes, lower voltage systems typically mean less power and speed compared to higher voltage systems. With this tool, you get high speeds, a 3.9° oscillating angle that Milwaukee rightfully describes as aggressive, and what seems to be decent runtime.

Makita’s 12V CXT cordless oscillating multi-tool operates at 6,000 to 20,000 OPM and has a 3.2° oscillation angle. It’s not brushless or tool-free.

Compare: Makita Multi-Tool Kit via Amazon

Bosch 12V Max Brushless Starlock Oscillating Multi-Tool

Bosch’s 12V oscillating multi-tool operates at 5,000 to 20,000 OPM, and with a 2.8° oscillation angle. It features a brushless motor but is not tool-free.

Compare: Bosch 12V Multi-Tool Bare Tool via Amazon

Milwaukee M12 Fuel 2526 Oscillating Multi-Tool Cutting Task

It’s too soon to know how the new Milwaukee M12 Fuel oscillating multi-tool compares with respect to performance and user comfort, but so far it seems to be better featured than the competition. It’s priced a bit higher as well, but the greater features and claims of lowest vibration and fastest cutting speed could justify that for many users, especially M12 cordless power tool users.

Buy Now: Kit via Tool Nut
Buy Now: Kit via Acme Tools

So, what do you think – was this new M12 Fuel oscillating multi-tool worth the wait?

Milwaukee PIPELINE New Tools Show 2020 – Here’s What to Know

$
0
0

Milwaukee Pipeline NPS20 Banner

As you might know, Milwaukee Tool holds an annual new tool media event (NPS) where they announce a whopping number of new tools.

NPS is usually an exclusive media/press/influencer event.

This year, the COVID-19 threw a wrench into things, and NPS20 was effectively cancelled. Its absence has been felt, leaving us all without the typical window that allows us to look into the Milwaukee Tool’s future future releases.

How are we going to know what’s coming out soon?

That’s where the new Milwaukee PIPELINE comes into play.

What is the Milwaukee Tools Pipeline?

Pipeline will be a new web series where Milwaukee Tool shows off their latest and greatest new tools and accessories. At the time of this posting, (4) episodes are scheduled.

Milwaukee Tools Pipeline Episode Schedule

  • Episode 1: August 20th, 2020
  • Episode 2: September 10th, 2020
  • Episode 3: October 15th, 2020
  • Episode 4: November 12th, 2020

All episodes will begin at 5pm CST.

Milwaukee Tools Pipeline Episodes

Episode 1: Milwaukee M12, M18, MX Fuel Cordless Power Tools and Equipment

Our M12, M18 and MX FUEL cordless power tool and equipment systems are growing! Learn about the newest products in our rapidly growing collection as well as the accessories that pair with them to provide the very best performance and durability.

Episode 2: Milwaukee Packout Modular Tool Storage

Our PACKOUT Modular Storage System has revolutionized tool, accessory and equipment storage on the jobsite. Be the first to experience the expansion of our PACKOUT system as well as our expansion into a new product category for Milwaukee Tool!

Episode 3: Milwaukee Trade-Specific Cordless Power Tools, Hand Tools, Accessories

Our users inspire us to create the very best solutions for their needs. Learn about the newest trade-focused and application-driven products inspired by our end-user’s jobsite needs. Experience innovation in our rapidly growing M12, M18 and MX FUEL Systems, as well as our new hand tool and accessory solutions.

Episode 4: New Milwaukee Jobsite Lighting Systems and Protective Gear

Milwaukee Tool has made exciting strides in jobsite PPE and lighting systems. Find out more about how our safety and lighting systems will keep you safe and productive with our newest personal protective equipment and cordless jobsite lighting solutions.

How to Watch Milwaukee Pipeline

Milwaukee Pipeline NPS20

Register HERE via Milwaukee Tool

You need to register in order to gain full access to the exclusive online event. Registration is FREE.

Should You Watch?

Every year, a lot of people ask “how can we partake in Milwaukee’s NPS new tools show,” and the answer is “you can’t.”

Some influencers and media channels live-stream from the event, or record demos and presentations, and that gives you a glimpse of things. But, that’s also an unfiltered stream of presentations and demos, often with heads and shoulders in the way of cameras, or noisy tools being demo’ed in the background.

Registration is free. The question isn’t should you watch, but why wouldn’t you?

Your Expectations for ToolGuyd New Tool Coverage?

Milwaukee has provided some ideas on media participation, and I’m interesting in hearing your thoughts on this. Some of the suggestions include:

  • Hosting a watch party
  • Hosting a Q&A or interview after the event
  • A more in-depth view of the development and innovation behind a new solution

Media will receive more details, imagery, and information – typical press kit stuff – and so I’ll be able to answer your questions once announcements are made. But, I’ll also be digesting information at about the same time as viewers.

I’m thinking that we could follow up with a rundown of each episode after they go live, and you guys could chime in about you want to see discussed in more detail. What are your thoughts in video interviews? Perhaps remote demos? We have some time to plan things out.

Viewing all 5920 articles
Browse latest View live


Latest Images